What To Do If Your Water Heater Unexpectedly Stops Working
What To Do If Your Water Heater Unexpectedly Stops Working
Blog Article
Do you find yourself in search of answers concerning How to Troubleshoot and Repair an Electric Water Heater?
Several modern-day residences make use of an electrical hot water heater for their furnace, as a result of its ease and ease of use. Nonetheless, similar to any other electric devices, problems may occur with its usage, suddenly. It can be really frustrating to awaken to a cool shower as opposed to a hot one or having your bath with water that isn't hot adequate and even also warm. Whatever the instance might be, water heater problems can be quite nerve-racking. Fortunately, we've made a list of feasible remedies to your hot water heater concerns. There are a variety of variables that can create most of these troubles, maybe a problem with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you turn off the main power supply for safety and security. Whatever the trouble is, getting it taken care of ought to not position too much of an issue if you adhere to these actions:
Call A Specialist:
If after changing all defective components and also resetting your temperature level, the hot water heater still isn't functioning, you might require to speak to a specialist plumber for a specialist point of view. The issue with your heating unit could be that the hot and cold taps have been switched or it might be undersized for the quantity of warm water needed in your home. Whatever the case may be, a professional plumber would aid address the trouble.
Check Your Power Supply:
As standard as this might appear, it is extremely required. Without sufficient power, your water heater will not operate. So the first thing to do when your water unexpectedly stops working is to confirm that it isn't a power trouble. Inspect if the fuse is burnt out or the breaker stumbled. If the breaker is the concern, merely transform it on and off once again. Replace any type of broken or worn-out fuse. Test the device with power after these adjustments to see if it's now working.
Check Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't warm enough, you may require to examine the temperature level settings on your upper thermostat. Make certain the breaker is turned off before doing anything. Open the access panel and also press the red switch for temperature reset above the thermostat. This need to aid heat up the water. Transform the breaker back on and also examine if the trouble has actually been solved.
Inspect the Burner in the Water Heater:
If it's not a power problem, then attempt checking out your burner if it is still functioning. Check each of your burner to make sure the problem isn't with any one of them. If any one of them is malfunctioning, change that part and then examine whether the warm water is back on.
Conclusion
Hot water heater issues are not always significant. A number of them result from small issues like a blown fuse or damaged heating element. Replacing the malfunctioning parts need to work. However, if you are still not able to solve the issue, give a call to your closest plumber ahead to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I was introduced to that write-up on Hot Water Heater Repair through a good friend on a different web blog. Please take the opportunity to distribute this post if you enjoyed reading it. Thanks a lot for taking the time to read it.
Prices & Booking
Report this page